![charles waugh](/img/default-banner.jpg)
- 41
- 256 157
charles waugh
United States
Приєднався 17 вер 2009
I am a Renaissance Man(iac). My brain continues to run 24 hours a day.
I have a photographic portrait studio (www.charleswaugh.com and www.weloveourpets.org)
I create functional art (www.redirectedmaterials)
I have designed and launched products on Kickstarter
I love Spencerian penmanship and am quite good at it.
I love to read, read, read!
And, I put videos up here from time to time as well.
:-)
I have a photographic portrait studio (www.charleswaugh.com and www.weloveourpets.org)
I create functional art (www.redirectedmaterials)
I have designed and launched products on Kickstarter
I love Spencerian penmanship and am quite good at it.
I love to read, read, read!
And, I put videos up here from time to time as well.
:-)
Cottrell CPO - Truck Traffic Hazard 11 June 2024
NOTE: I have gotten numerous comments on this video disparaging me as an idiot for complaining about how an articulated rig has to use the intersection to turn. I have deleted those and will continue to delete all such pointless rants.
I understand the realities of driving a big rig, and yes, one has to start left and swing wide to make the turn. The point of the video is that running 140 truck trips of this type (or 12 yard, 5 and 6-axle dump trucks) through this intersection daily for four years will change the safety profile of this road dramatically.
BACKGROUND:
The Portland Water Bureau has proposed and been given approval by the Multnomah County Planning Department to build a $2.1 billion water filtration facility in rural farmland 25 miles distant from the city core. This will require trucking out 1.2 million cubic yard of dirt, plus tcuking in all of the construction materials, etc.
The Cottrell CPO has fought this vigorously and the case is currently before the Oregon Land Use Board of Appeals with a final determination due possibly in October.
In June of 2023, for our testimony to the Multnomah County Planning Department hearings officer, we created a video showing the dangers that truck traffic will pose when 70 truck trips per day are run through the Cottrell/Bluff intersection, which, on a daily bassis, only sees residential and farm traffic.
It was dimissed by PWB as being 'staged'. Huh!
Well, here is a video I captured this morning, 11 June 2024 showing one of the very hazards we had highlighted.
I understand the realities of driving a big rig, and yes, one has to start left and swing wide to make the turn. The point of the video is that running 140 truck trips of this type (or 12 yard, 5 and 6-axle dump trucks) through this intersection daily for four years will change the safety profile of this road dramatically.
BACKGROUND:
The Portland Water Bureau has proposed and been given approval by the Multnomah County Planning Department to build a $2.1 billion water filtration facility in rural farmland 25 miles distant from the city core. This will require trucking out 1.2 million cubic yard of dirt, plus tcuking in all of the construction materials, etc.
The Cottrell CPO has fought this vigorously and the case is currently before the Oregon Land Use Board of Appeals with a final determination due possibly in October.
In June of 2023, for our testimony to the Multnomah County Planning Department hearings officer, we created a video showing the dangers that truck traffic will pose when 70 truck trips per day are run through the Cottrell/Bluff intersection, which, on a daily bassis, only sees residential and farm traffic.
It was dimissed by PWB as being 'staged'. Huh!
Well, here is a video I captured this morning, 11 June 2024 showing one of the very hazards we had highlighted.
Переглядів: 384
Відео
Character of the Area vs Industrial Development
Переглядів 6910 місяців тому
Character of the Area vs Industrial Development.mp4
A Sledge - the most useful hauling item ever.
Переглядів 584Рік тому
I made this sledge from a thrown-out piece of 1/2" UHMW and pressure-treated 2x6's about 20 years ago. It's still in service, and it makes my life here on our 3 acres much easier than wrestling a wheelbarrow or lifting junk up into a pull-behind cart/trailer. It is the ONLY way to move heavy rocks - just roll 'em in!
Fun funnel Design FAIL
Переглядів 36Рік тому
Funnels need to work or they make amess and defeat their purpose. I point out what works and what doesn't.
A Can Opener! A REALLY COOL Can Opener! Check it out! A Can Opener!
Переглядів 141Рік тому
So . . . my brother sent me a can opener. Yup! That's how close we are as brothers - he sent me a can opener. And, since it just showed up from Amazon with no note, I wondered who it was from, or if it was a mistake somehow. Well, a couple days later he called and assked how I liked it. I confessed I hadnt even tried it (we don't open a lot of cans around here.) A week or two later I finally tr...
Making and S-Bend in 1-1/2" PVC Pipe for a drain using heat
Переглядів 123Рік тому
I've been working on the messed-up plumbing in our house for a coupla months now and I am finally getting it dialed. It's been so long because I have a lot of other stuff going on in my life, not just plumbing! I needed to link up two fittings that are 5" offset horizontally and about 30" apart vertically, so I needed an 'S-bend'. In this video I use a heat gun and the sliding table on my table...
Fixing SawStop Sliding Table Fence Squareness Repeatablility.
Переглядів 2,5 тис.Рік тому
Fixing the SawStop Sliding Table Fence. It was designed s poorly it would NEVER be repeatably square. So, I fixed it!
Ivermectin use in treating SARS-CoV2. Peer-reviewed journal article.
Переглядів 3132 роки тому
CONCLUSION: "...The apparent safety and low cost suggest that ivermectin is likely to have a significant impact on the SARS-CoV-2 pandemic globally." Ivermectin may actually help in treating SARS-CoV2. Huh! Whodathunkit? From all the press about overdoses one would think that ivermectin is the new fentanyl (truly false reports, see: NHSSequoyah/posts/4192195714168045).
Romans 4:4-5
Переглядів 8033 роки тому
An exposition of two verses out of Paul's letter to the Romans.
MY FAVE!! Wrangle those cables! The Gear Snake Tie Down
Переглядів 1333 роки тому
Wrangle those unruly cables! Put them under bindage! (bondage? bandage?) . . . whatever! It's great stuff, these Gear Snake Tie Downs! Comes in many colors, but I like the BRIGHT orange - it's gently alarming.
BEST Vise for heavy work (or ANY work!)
Переглядів 6473 роки тому
This is a vise I just got and fixed up (video coming later on that). It has a Swiveling Jaw (note the caps!) It is totally amazing!!!! See for yourself!
Embossed Business Cards for my portrait studio
Переглядів 2,7 тис.3 роки тому
I make my own business cards for my portrait studio using a Lucris Press (way cool toy!) Studio: www.charlesfineartportraits.com I print the cards on a photo inkjet printer, trim them to EXACT size on a modified Dahle Rotary Trimmer, emboss them on the Lucris Press, and then glue them to a backer card to add heft and 'mystery'. : - )
My Table Saw Fence Upgrades on a Delta Unifence
Переглядів 11 тис.3 роки тому
I LOVE the Delta Unifence, but I still wanted it to be mo' bettuh! Here's what I did . . .
Chamfering Fixture for small parts
Переглядів 5033 роки тому
A quick fixture I made for chamfering small parts. it clips right onto my 1" belt sander table and dials i to .00%" or so accuracy quite easily.
In Praise of File Cabinets (for your shop)
Переглядів 1,8 тис.3 роки тому
In Praise of File Cabinets (for your shop)
Chicken tractor with first-class lever
Переглядів 1,3 тис.3 роки тому
Chicken tractor with first-class lever
Tuning the Leatherman Wave + (rather *unlike* tuning a violin!)
Переглядів 32 тис.3 роки тому
Tuning the Leatherman Wave (rather *unlike* tuning a violin!)
FrankenSkillet - the joining of two skillets into ONE. Hand-riveting stainless steel.
Переглядів 613 роки тому
FrankenSkillet - the joining of two skillets into ONE. Hand-riveting stainless steel.
HomeMadeTools.net - the BEST forum for tools and makers I know!
Переглядів 9963 роки тому
HomeMadeTools.net - the BEST forum for tools and makers I know!
Peeling a hard-boiled egg with only my left hand (plus: SECRET to making perfectly peeling eggs!!)
Переглядів 3865 років тому
Peeling a hard-boiled egg with only my left hand (plus: SECRET to making perfectly peeling eggs!!)
My Bench and the VISE!! (that I built)
Переглядів 1705 років тому
My Bench and the VISE!! (that I built)
Lucris Embossing/Letterpress/Clicker Press
Переглядів 6 тис.5 років тому
Lucris Embossing/Letterpress/Clicker Press
Powermatic 1150 Variable Speed Drill Press
Переглядів 4,7 тис.6 років тому
Powermatic 1150 Variable Speed Drill Press
waaaaaaa snowflake
I bought one of these at an estate sale thinking I could use it for sheet metal. Glad I looked it up. I will have the knives professionally sharpened and will ne looking to sell it.
I own this model. A tip would be when you press your foot to the floor, move hte blade back before you lift your foot. Reduces any cut problems
Hey. How can I get this machine.
Thank you for teaching me about how this machine works. I have never seen one before today and I found your video for an explanation
Have you found the duplicator, or copy carvers?
Great video. But it underscores the bigger issue: this is a terrible design by Harvey. I don’t have the time or patience or skills that you do. So, I’m dumping my turd sliding table. You are a true master man.
Why is it Harveys fault lol
How much your machine morso sir
I missed something, I never saw you tighten the miter gage in the T slot. No wonder it was loose. I was also watching for your square test to be finished. If you make 5 cuts the way you were doing, then on the fifth time cut off an 1/8 " break it half and see if the 2 pieces are the same thickness.
Hey Charles, Can I order this setup from you?
Do you make the auxiliary clamp to sell?
thanks its helpful. but... does anyone else think his suit looks too big for him? lol irony
As I note in the first comment on this page: Find a suit jacket that fits you the way YOU like and measure IT. The current rage in styles is a 'skinny' suit, which, to me, looks way too tight across the waist (leaving you with the BIG X cross your chest where the suit is straining against the button when closed.) Looks great on models who are perfectly fit and very young. That's not everybody's body shape, nor taste. As with all style decisions, your mileage WILL vary. See 'Kanye West' for details. : - )
Nothing disappears faster than a sharp pencil. A close second is the tape measure you used 5 seconds ago
... No hope in going to the past come to the loving savior today Seek his Holy Spirit in prayer today he can give you peace confort and guidance today Romans 6:23 For the wages of sin is death, but the free gift of God is eternal life in Christ Jesus our Lord. Come to Jesus Christ today Jesus Christ is only way to heaven Repent and follow him today seek his heart Jesus Christ can fill the emptiness he can fill the void Heaven and hell is real cone to the loving savior today Today is the day of salvation tomorrow might be to late come to the loving savior today John 3:16-21 16 For God so loved the world, that he gave his only begotten Son, that whosoever believeth in him should not perish, but have everlasting life. 17 For God sent not his Son into the world to condemn the world; but that the world through him might be saved. 18 He that believeth on him is not condemned: but he that believeth not is condemned already, because he hath not believed in the name of the only begotten Son of God. 19 And this is the condemnation, that light is come into the world, and men loved darkness rather than light, because their deeds were evil. 20 For every one that doeth evil hateth the light, neither cometh to the light, lest his deeds should be reproved. 21 But he that doeth truth cometh to the light, that his deeds may be made manifest, that they are wrought in God. Mark 1.15 15 And saying, The time is fulfilled, and the kingdom of God is at hand: repent ye, and believe the gospel. 2 Peter 3:9 The Lord is not slack concerning his promise, as some men count slackness; but is longsuffering to us-ward, not willing that any should perish, but that all should come to repentance. Hebrews 11:6 6 But without faith it is impossible to please him: for he that cometh to God must believe that he is, and that he is a rewarder of them that diligently seek him. Jesus
I work in a woodcarving factory as a wood carver and this was used to clean up our line make them sharp and clean
Way cool! I wished I had a use for it, but I don't do carving, nor hand rails, etc It is an amazing machine- the cutters are super cool the way they cut but don't 'self-feed'
@@charlescfap I remember they had alot of different bits
Thanks, this is great!
How much price
How small can it engrave? 1mm?
i ate a funnel
Was it stainless steel or plastic?
Charles is awesome.
I have one but my template are all in reverse, anyone knows what they are used for? Thanks
Huh! I would guess they were used for making sand-cast (or similar proess) lettering that would be incised, not raised lettering, like for a bronze plaque on soemthing. Maybe incised lettering is more durable than raised lettering? Or collects less crud in the weather over time? That's a really interesting conundrum. I asked ChatGPT about raised or recessed lettering and got this: --- The decision to make the lettering on a bronze plaque raised or recessed depends on your personal preference and the intended use of the plaque. Here are some factors to consider: Raised lettering: > Gives the plaque a more classic and traditional look. > Provides a more tactile feel and can be easier to read from a distance. > May collect dust or debris in the recessed areas around the letters, which can make cleaning more difficult. Recessed lettering: > Provides a more modern and sleek appearance. > Is less likely to collect dirt or debris, making cleaning easier. > Can be harder to read from a distance, especially if the lighting is poor. Ultimately, the decision should be based on the specific design of the plaque and the intended use. If you're not sure which option to choose, you may want to consult with a professional in bronze casting or a designer to help you make an informed decision.
Does the measuring process differ at all when measuring a double breasted jacket?
Awesome presentation!
That type is fairly common. They break the seal between the lid and body of the can. They are cool, but be wary, some of them tend to bite into the can when they’re not supposed to and then shave off tin splinters that you might not notice, which get into the food. Dangerous if consumed.
Thank you so much for posting this! This has recently become one of my favorite verses. I believe it is such a critical part of my belief. I appreciate how you broke everything down and explained it in such a way that even a simple guy like me could understand! Keep up the great work!
Do you offer business cards on your website?
David, I do not, and if I did, no one would be able to afford them. : - ) If you google 'embossed business cards' you'll find a bunch of folks who do offer them, and I know that others do them 2-layer like did here.
That a year later I download 9 filing cabinets. And have a glues and goos label on a drawer.
Thank you, very helpful for my Vinted closet. I'm selling a lot of jackets
Nice to see a video of someone who knows his craft… And a shame that SawStop demonstrated poor engineering and craftsmanship for such an expensive table saw
Thank you so much had some blazer s,suits and coats to sell you have helped me ever so much .I really appreciate your help 100%
This is really helpful. Thank you!
How much
I have no idea. I bought mine used 15 yrs ago for 600 dollars. Sold it for 500 a few years later.
Hello 👋🏻 could you please tell me where to buy that presser ?
Here's some ideas: industrialsewingmachineman.com/machines/mach.asp?dir=leathercutting&brand=Cowboy&Model=8360&ProductType=Leather+cutting++Machines www.worldoftest.com/manual-test-sample-clicker-press They are called 'clicker press' - search google for that. Cheers!
@@charlescfap thank you, Sir
Hi Charles, May i know do you need the best supplier of Steel Furniture from China?
How do you join the frame together?
I use white glue and a nail gun, but one can buy 'frame nailers' that are pnuematic automated floor-mount tools that make it super fast and super easy.
great video bro
Hi! Can I ask how did you make the "counter" cliche?
I bought both from OWOSSO - they make embossing dies.
Wow, I want one..
How do you determine jacket size if no tag is present, for example 42 R 44R etc.?
Its pit to pit measurement x 2 minus 2. For example you will measure 22 inches from armpit to armpit, than the equation will be: 22 x 2 - 2 = 42. So the jacket size is 42. I found this equation working best for current fit, in the past circumference was usually reduced by 4, which makes this example size 40, but this a too loose fit for most modern men. Regular, Short or Long depends on sleeve and back length. In general sleeves up to 24 inches are Short, 25 is Regular and 26 inches and more is Long. This can vary in smaller or bigger sizes, up or less 1 inch. Use Size tag only as a guideline, to start your search what size to look for and from there always use your jacket measurements. Don't rely on tag.
Mine won't go Front to back. Feels like there's a lock?
The table locks in place place with a Spring loaded lock of some sort. Turning the handle Makes a solenoid release the Spring while you move it around. You can hear it buzzing as you move the table. When you release the handle, there is a loud wack, that is when when the Spring clamps both axes. It may be that the solenoid is old and worn it may be or it may be that One axis is very dirty. You will have to just tear it apart and figure it out.
Excellent video, best online. Ive been measuring sleeves wrong and you confirmed the pit to pit which I think many sellers get wrong.
Thank you for your video. We need a part for our chopper, do you know of a company that sells parts for older moulding choppers?
Nice
The Protestant Scripture Twister Series #13 ~ Romans 4:1-5 ua-cam.com/video/FX896yDYpyM/v-deo.html
Yes, twisted by the Vatican. Vatican teaches Peter is our Apostle So why does Peter confirm Paul as Apostle to you/I ? Gal 2:7-9, Acts 15:7-12, 2 Pet 3:15-16
@robusc4940 I see you do not understand what an Apostle is? What is an Apostle? He is "one who is sent." Peter and the other 11 Apostles were sent by Christ Himself. Paul was also sent by Christ Himself. Now all Apostles are Biships in the broad sense of the term. The ancient Church we call Catholic, has Christ as its head. Thus, the Church, who has the full authority of Christ to speak and act as if Christ Himself is speaking and acting, sends out others. These are Bishops of the Church called Catholic. So Peter and Paul are both Apostles. Paul is not one of the original 12 (Mathias, not Judas), Christ called Apostles. But in the broad sense Paul and Barnabus are both Apostles. Barnabus was the Bishop of Cyprus and Paul was a Bishop for the incoming Gentiles, even though it was Peter who brought in the first Gentiles. Blessings and I hope this clears up any misconceptions you have about Peter and Paul.
@@Ryan_Zell I see you dont understand that Paul (the mystery) was sent to the Gentiles/UNcircumcision and that the 12 (prophecy) are for the circumcision (Israel) eg James 1:1 to the 12 tribes, Gal 2:7But contrariwise, when they saw that the gospel of the uncircumcision was committed unto me, as the gospel of the circumcision was unto Peter;
Awesome work
Why don't you have more teaching videos on the word of God but especially the ministry of reconciliation that we have been given?
Absolutely BREATHTAKING
I have a non-functioning one if anyone is interested I’ll send pics
This great if your fence stays on the saw. I take mine off a lot.
Great tutorial thank you!